Free tool
Printable Shipping Labels (4x6 & Label Sheets)
Print shipping labels on the label paper you already have. This page opens on half-sheet labels, two per letter page, and you can switch to 4×6, 6 or 10 per sheet, or A6 in one click. Start on any position of a part-used sheet and print as many labels as you need.
- Seven layouts: 4x6 thermal, 4x6 on letter, half sheet, 3⅓ × 4 (6 up), 2 × 4 (10 up), A6 and A4 4-up.
- Start at any label position, so part-used sheets are not wasted.
- Print one label per box with Box 1 of N on each.
- The PDF is sized exactly, so labels line up when printed at 100%.
How to print shipping labels
Pick your label paper
Choose the layout that matches your labels: a 4×6 roll, half sheets, or 6 or 10 per sheet.
Set the start position
If some labels on the sheet are used, choose the first empty position. Positions count left to right, top to bottom.
Fill in the addresses
Add the sender, recipient, order number and number of boxes. The preview shows exactly where each label lands on the sheet.
Test on plain paper
Print one page on plain paper, lay it over a label sheet and hold both up to a window to check that the labels line up.
Print at 100%
In the print window choose Actual size or 100%, and turn off Fit to page and any scaling.
Shipping label sizes compared
| Size | Per sheet | Printer | Common use |
|---|---|---|---|
| 4 × 6 in | 1 (roll or fanfold) | Thermal | The standard size for parcel labels in the US |
| Half sheet, 8½ × 5½ in | 2 per letter page | Inkjet or laser | Large boxes and a big address |
| 3⅓ × 4 in | 6 per letter page | Inkjet or laser | Small boxes and mailers |
| 2 × 4 in | 10 per letter page | Inkjet or laser | Envelopes and small packages |
| A6, 105 × 148 mm | 1, or 4 per A4 sheet | Thermal or A4 printer | Couriers in the UK and Europe |
4x6 vs 6x4 shipping labels
They are the same label. 4 × 6 describes it standing up, 4 inches wide and 6 inches tall, which is how thermal printers feed it. 6 × 4 describes the same label lying on its side. Some printer drivers ask for 4 × 6 and some for 6 × 4; if your label comes out sideways or cut off, change the paper orientation in the printer settings rather than the size.
Label sheet layouts this tool matches
The sheet layouts follow standard US letter label sizes that many brands sell, including the sizes of Avery templates 5126, 8126, 5164, 8164, 5163 and 8163 and store-brand equivalents. Check that the label size on your pack matches before you print. PureCalculate is not affiliated with Avery.
| Layout | Label size | Margins |
|---|---|---|
| Half sheet | 8½ × 5½ in, 2 per sheet | None; the sheet is split in half |
| 6 per sheet | 3⅓ × 4 in | ½ in top and bottom, two columns |
| 10 per sheet | 2 × 4 in | ½ in top and bottom, two columns |
Most alignment problems come from scaling, so first check that the print window says 100% or Actual size. If every label is shifted the same way, the printer is feeding the sheet slightly off; printing from a different tray or the manual feed slot usually fixes it.
Thermal printer or regular printer?
Thermal printer
Prints a 4x6 label in about a second with no ink or toner. Worth it if you ship every day.
Inkjet or laser
Uses label sheets and the printer you already own. Fine for a few parcels a week.
Plain paper
Print 4x6 on letter, cut it out and tape it on. Works when you have no labels at hand.
Ink and weather
Laser and thermal labels resist water better than inkjet. Cover inkjet labels with clear tape.
How many labels do you need?
You need one label per box, plus one spare if you like to put a copy inside the box. Set the number of boxes and the tool counts the positions for you. On a 6-up sheet, 3 boxes starting at position 5 fill positions 5 and 6 on the first sheet and position 1 on a second sheet, and the preview shows the page count before you print.
Choosing label paper
| Paper | Good for | Watch out for |
|---|---|---|
| Full-sheet sticker paper | Cutting out a 4×6 label on a home printer | Takes a minute to cut neatly |
| Half-sheet labels | Large, easy-to-read labels from any printer | Two labels per sheet, so plan for an even number |
| 6-up and 10-up sheets | Small boxes, mailers and envelopes | Check the label size matches the layout you pick |
| Thermal rolls or fanfold | Fast 4×6 printing with no ink | Direct thermal labels can fade in heat and sunlight over time |
| Inkjet or laser labels | Your existing printer | Use labels made for your printer type |
If you print only a few labels a month, plain paper and clear tape work fine. If you ship most days, a 4×6 thermal printer quickly pays for itself in time and ink.
More shipping tools
Shipping label maker
Make a label for 4x6, sheets or A6.
Shipping label template
A filled-in example in the standard format.
Packing slip template
List what is in the box, with backorders.
Purchase order generator
Order stock from your suppliers.
Printable shipping labels FAQ
What size is a standard shipping label?
4 × 6 inches is the standard size for parcel labels in the US. In the UK and Europe, A6 (105 × 148 mm) is common.
Can I print shipping labels on regular paper?
Yes. Choose 4 × 6 on letter or half sheet, print on plain paper, cut the label out and tape it to the box with clear tape over it.
How do I print on a part-used label sheet?
Choose the sheet layout, then set Start at label position to the first empty label. The PDF leaves the used positions blank.
Why don't my labels line up with the sheet?
Usually because the print window is set to Fit to page. Print at 100% or Actual size, and check that your label pack matches the layout you chose.
What is the difference between 4x6 and 6x4 labels?
Nothing. It is the same label, described standing up or lying on its side.
Do these labels work with Avery sheets?
The half sheet, 6-up and 10-up layouts follow the common US label sizes used by Avery templates 5126 and 8126, 5164 and 8164, and 5163 and 8163. PureCalculate is not affiliated with Avery.