Free tool

Printable Shipping Labels (4x6 & Label Sheets)

Print shipping labels on the label paper you already have. This page opens on half-sheet labels, two per letter page, and you can switch to 4×6, 6 or 10 per sheet, or A6 in one click. Start on any position of a part-used sheet and print as many labels as you need.

Loading the shipping label maker…
Printable shipping labels in short
On this page

How to print shipping labels

1

Pick your label paper

Choose the layout that matches your labels: a 4×6 roll, half sheets, or 6 or 10 per sheet.

2

Set the start position

If some labels on the sheet are used, choose the first empty position. Positions count left to right, top to bottom.

3

Fill in the addresses

Add the sender, recipient, order number and number of boxes. The preview shows exactly where each label lands on the sheet.

4

Test on plain paper

Print one page on plain paper, lay it over a label sheet and hold both up to a window to check that the labels line up.

5

Print at 100%

In the print window choose Actual size or 100%, and turn off Fit to page and any scaling.

Shipping label sizes compared

SizePer sheetPrinterCommon use
4 × 6 in1 (roll or fanfold)ThermalThe standard size for parcel labels in the US
Half sheet, 8½ × 5½ in2 per letter pageInkjet or laserLarge boxes and a big address
3⅓ × 4 in6 per letter pageInkjet or laserSmall boxes and mailers
2 × 4 in10 per letter pageInkjet or laserEnvelopes and small packages
A6, 105 × 148 mm1, or 4 per A4 sheetThermal or A4 printerCouriers in the UK and Europe

4x6 vs 6x4 shipping labels

They are the same label. 4 × 6 describes it standing up, 4 inches wide and 6 inches tall, which is how thermal printers feed it. 6 × 4 describes the same label lying on its side. Some printer drivers ask for 4 × 6 and some for 6 × 4; if your label comes out sideways or cut off, change the paper orientation in the printer settings rather than the size.

Label sheet layouts this tool matches

The sheet layouts follow standard US letter label sizes that many brands sell, including the sizes of Avery templates 5126, 8126, 5164, 8164, 5163 and 8163 and store-brand equivalents. Check that the label size on your pack matches before you print. PureCalculate is not affiliated with Avery.

LayoutLabel sizeMargins
Half sheet8½ × 5½ in, 2 per sheetNone; the sheet is split in half
6 per sheet3⅓ × 4 in½ in top and bottom, two columns
10 per sheet2 × 4 in½ in top and bottom, two columns
If the labels are slightly off

Most alignment problems come from scaling, so first check that the print window says 100% or Actual size. If every label is shifted the same way, the printer is feeding the sheet slightly off; printing from a different tray or the manual feed slot usually fixes it.

Thermal printer or regular printer?

Thermal printer

Prints a 4x6 label in about a second with no ink or toner. Worth it if you ship every day.

Inkjet or laser

Uses label sheets and the printer you already own. Fine for a few parcels a week.

Plain paper

Print 4x6 on letter, cut it out and tape it on. Works when you have no labels at hand.

Ink and weather

Laser and thermal labels resist water better than inkjet. Cover inkjet labels with clear tape.

How many labels do you need?

You need one label per box, plus one spare if you like to put a copy inside the box. Set the number of boxes and the tool counts the positions for you. On a 6-up sheet, 3 boxes starting at position 5 fill positions 5 and 6 on the first sheet and position 1 on a second sheet, and the preview shows the page count before you print.

Choosing label paper

PaperGood forWatch out for
Full-sheet sticker paperCutting out a 4×6 label on a home printerTakes a minute to cut neatly
Half-sheet labelsLarge, easy-to-read labels from any printerTwo labels per sheet, so plan for an even number
6-up and 10-up sheetsSmall boxes, mailers and envelopesCheck the label size matches the layout you pick
Thermal rolls or fanfoldFast 4×6 printing with no inkDirect thermal labels can fade in heat and sunlight over time
Inkjet or laser labelsYour existing printerUse labels made for your printer type

If you print only a few labels a month, plain paper and clear tape work fine. If you ship most days, a 4×6 thermal printer quickly pays for itself in time and ink.

More shipping tools

Shipping label maker

Make a label for 4x6, sheets or A6.

Shipping label template

A filled-in example in the standard format.

Packing slip template

List what is in the box, with backorders.

Purchase order generator

Order stock from your suppliers.

Printable shipping labels FAQ

4 × 6 inches is the standard size for parcel labels in the US. In the UK and Europe, A6 (105 × 148 mm) is common.

Yes. Choose 4 × 6 on letter or half sheet, print on plain paper, cut the label out and tape it to the box with clear tape over it.

Choose the sheet layout, then set Start at label position to the first empty label. The PDF leaves the used positions blank.

Usually because the print window is set to Fit to page. Print at 100% or Actual size, and check that your label pack matches the layout you chose.

Nothing. It is the same label, described standing up or lying on its side.

The half sheet, 6-up and 10-up layouts follow the common US label sizes used by Avery templates 5126 and 8126, 5164 and 8164, and 5163 and 8163. PureCalculate is not affiliated with Avery.

Scroll to Top