Loading the Horsepower Calculator...
- Horsepower equals torque in lb-ft times RPM divided by 5252.
- You can also solve for torque or for RPM when you know the other two values.
- Results are shown in horsepower, kilowatts and metric horsepower, with torque in lb-ft and N·m.
- Torque and horsepower curves cross at 5,252 RPM.
How to use the horsepower calculator
Choose what to find
Pick horsepower, torque or RPM.
Pick your units
Choose lb-ft or N·m for torque, and hp or kW for power where it is an input.
Enter the known values
Type the two values you know. The form shows only the fields you need.
Read the result
See the answer with horsepower, kilowatts, metric horsepower, torque in both units and RPM.
How horsepower is calculated
Horsepower formulas
Horsepower = torque (lb-ft) × RPM ÷ 5252
Torque = horsepower × 5252 ÷ RPM
RPM = horsepower × 5252 ÷ torque
Conversions: 1 hp = 0.7457 kW, and 1 lb-ft = 1.3558 N·m
The constant 5252 is 33,000 ÷ (2π), which comes from the definition of horsepower.
Example 1: power from torque
An engine makes 400 lb-ft of torque at 5,000 RPM.
- Horsepower 400 × 5,000 ÷ 5252 = 380.8 hp
- Kilowatts 380.8 × 0.7457 = 284.0 kW
Power rises with both torque and RPM, so a high-revving engine can make more power from less torque.
Example 2: torque, RPM and metric torque
An engine makes 300 hp at 6,000 RPM. Another makes 200 hp and 210 lb-ft. A third makes 542 N·m at 4,500 RPM.
- Torque at 300 hp, 6,000 RPM 300 × 5252 ÷ 6,000 = 262.6 lb-ft
- RPM at 200 hp and 210 lb-ft 200 × 5252 ÷ 210 = about 5,002 RPM
- Power at 542 N·m, 4,500 RPM 542 N·m is 399.8 lb-ft, so 342.5 hp
Convert N·m to lb-ft first, then apply the same formula.
Reading horsepower figures
Mechanical horsepower (hp) is the common figure in the United States, while metric horsepower (PS) is slightly smaller. Power measured at the wheels on a dyno is lower than at the crankshaft because of drivetrain losses. Torque and power are linked by RPM, so a single peak number does not describe how an engine drives. Use the gear ratio calculator to turn engine speed into road speed and the engine displacement calculator to size the engine.
Horsepower units compared
| Unit | Watts |
|---|---|
| Mechanical horsepower (hp) | 745.7 W |
| Metric horsepower (PS or CV) | 735.5 W |
| Kilowatt (kW) | 1,000 W |
Example: 400 lb-ft of torque at 4,500 RPM is 400 × 4,500 ÷ 5,252 = 342.7 hp, or about 255.5 kW.
Published engine ratings in the U.S. are often measured to the SAE J1349 standard, which corrects results to standard air conditions. Wheel horsepower on a dyno is lower than engine horsepower because of drivetrain losses.
Where a horsepower calculator helps
Dyno sheets
Check peak power against peak torque and RPM.
Engine specs
Convert between hp, kW, lb-ft and N·m.
Build planning
Estimate the torque needed to reach a power goal.
Comparing engines
Compare cars and motorcycles in a common unit.
Check where a figure was measured. Wheel horsepower will be lower than crank horsepower for the same engine, so only compare like with like.
Horsepower calculator FAQ
How do I calculate horsepower from torque?
Multiply torque in lb-ft by RPM and divide by 5252. For 400 lb-ft at 5,000 RPM the result is 380.8 hp.
Why is the constant 5252?
It is 33,000 divided by 2π, taken from how horsepower is defined, and it links torque, RPM and power.
How do I convert horsepower to kilowatts?
Multiply by 0.7457. So 380.8 hp is about 284 kW.
Why do torque and horsepower cross at 5,252 RPM?
At that speed the formula gives the same number for both, when torque is in lb-ft and power is in hp.
What is the difference between hp and PS?
Mechanical horsepower (hp) and metric horsepower (PS) are slightly different units, with PS a little smaller.
Can I use N·m for torque?
Yes. Pick N·m and the calculator converts to lb-ft before applying the formula.
How much horsepower is 400 lb-ft at 4,500 RPM?
About 342.7 hp.